rocket control simulation using labview
-
- interested
- Сообщения: 5
- Зарегистрирован: 12 окт 2010, 09:25
- Версия LabVIEW: 2009
- Контактная информация:
rocket control simulation using labview
i'm in need of help on this topic, can anyone give me some idea??
- K C
- interested
- Сообщения: 8
- Зарегистрирован: 04 июн 2009, 14:23
- Версия LabVIEW: 3 till 2013
- Откуда: Apeldoorn / Amersfoort The Netherlands
- Контактная информация:
Re: rocket control simulation using labview
Hi (OddOne) ,
Maybe there are people here that can help you but, I think you have to tell a bit more about what you want.
Can you build a Front panel with controls and indicators that you want to see ?
Maybe there are people here that can help you but, I think you have to tell a bit more about what you want.
Can you build a Front panel with controls and indicators that you want to see ?
-
Eugen Graf
- guru
- Сообщения: 6502
- Зарегистрирован: 13 ноя 2007, 02:20
- Награды: 4
- Версия LabVIEW: 2009
- Откуда: Saarbrücken
- Контактная информация:
Re: rocket control simulation using labview
Just try the Moonlanding Example from Example Finder. May be it will help you. As just sad, explain your issue some better.
Regards, eg
Regards, eg
-
- interested
- Сообщения: 5
- Зарегистрирован: 12 окт 2010, 09:25
- Версия LabVIEW: 2009
- Контактная информация:
Re: rocket control simulation using labview
what i am trying to simulate is like the car backward parking example.. the difference is, i want to make the rocket fly to the target. the target is movable within the grid...i hope my explanation is clear and sufficient..
-
Eugen Graf
- guru
- Сообщения: 6502
- Зарегистрирован: 13 ноя 2007, 02:20
- Награды: 4
- Версия LabVIEW: 2009
- Откуда: Saarbrücken
- Контактная информация:
Re: rocket control simulation using labview
I think, you have two possibilities to do that:
1. use picture control and s from the picture palette to draw and move/rotate objects
2. use common controls and indicators, and move them on the front panel using property nodes->position
1. use picture control and s from the picture palette to draw and move/rotate objects
2. use common controls and indicators, and move them on the front panel using property nodes->position
-
- interested
- Сообщения: 5
- Зарегистрирован: 12 окт 2010, 09:25
- Версия LabVIEW: 2009
- Контактная информация:
Re: rocket control simulation using labview
Good day everyone. I had manage to create a vi, simulating the rocket movement. however i need some help in inserting wind parameters ( wind speed and wind direction) into the vi. can anyone help me? thank you
- Вложения
-
- Rocket Project.rar
- (38 КБ) 580 скачиваний
-
mzu2006
- doctor
- Сообщения: 2456
- Зарегистрирован: 16 авг 2008, 02:12
- Награды: 3
- Версия LabVIEW: 7.1 10 11 12
- Откуда: St-Petersburg (RU), Phila, Boston, Washington DC
- Контактная информация:
Re: rocket control simulation using labview
May be, I am missing something. Don't you want to model interaction of gravity and thrust somehow?
Правила форума (Forum rules in Russian)
rm -rf /mnt/windows
rm -rf /mnt/windows
-
- interested
- Сообщения: 5
- Зарегистрирован: 12 окт 2010, 09:25
- Версия LabVIEW: 2009
- Контактная информация:
Re: rocket control simulation using labview
Nvm.. problem is solved already. but comes a new prob. how to change the initial rocket position so that i can key in any value and the vi will calculate the lat long?
1. Change the x coord into control
2. Y coord are calculated values
Need help on this ASAP. tq guys..
1. Change the x coord into control
2. Y coord are calculated values
Need help on this ASAP. tq guys..
-
- Похожие темы
- Ответы
- Просмотры
- Последнее сообщение
-
- 5 Ответы
- 847 Просмотры
-
Последнее сообщение dadreamer
-
- 3 Ответы
- 2068 Просмотры
-
Последнее сообщение PozhiloyGoblin
-
- 0 Ответы
- 344 Просмотры
-
Последнее сообщение maxim_MA
-
- 23 Ответы
- 2422 Просмотры
-
Последнее сообщение dadreamer
-
- 2 Ответы
- 391 Просмотры
-
Последнее сообщение ujin1